Jectron

This high-tech gasoline additive cleans the fuel distributor and injectors which can improve starting, idle, throttle response and mileage. Just add a can to your fuel.

 Ventil Sauber

This gasoline additive removes carbon deposits from valves and combustion chambers, especially important in modern cars with lean burning engines. It also helps protect the fuel system against corrosion and icing. Ventil Sauber is suited for both injected and carbuerated cars, and is safe for catalytic converters and turbocharged engines.

 Diesel Hi-Test

This diesel fuel additive protects against injection pump and injector wear, gives smoother engine performance and reduces. Recommended for today's low-sulphur diesel fuels.

Diesel Purge

A can or two run directly through the injection system can clear the injection nozzles eliminating hard starting, reducing knock and clatter, and increasing performance.

MoS2 Anti-Friction Additive

A molybdenum disulfide motor oil additive, which reduces wear and internal friction in your engine. For best results it should be added at each oil change.

MoS2 Gear Anti-Friction Additive

A molybdenum disulfide gear oil additive for manual transmissions, differentials, axles and steering gear boxes; reduces wear, operating temperature and noise.

Motor Oil Saver

A band-aid for old, tired engines, this oil additive raises oil viscosity, increases compression and reduces leaks. It is not a cure for anything but does stretch the life of a high mileage engine.

Oil Sludge Remover

A can added to your oil helps dissolve deposits and sludge buildup in your engine, suspending in the oil so they will be removed at your next oil change.